CZDL-IAC-10T

General

• Number of channels  : 1
• Dielectric strength  :  input～output、power supply 4000V AC,50Hz,1min power supply～output 1500V AC,50Hz,1min
• Output accuracy(20°C)  :  0.5% F.S.
• Temperature drift :  0.02% F.S./℃
• Response time  : Reach 90% of final value in 330ms
• Electromagnetic compatibility  : According to IEC 61326-1(GB/T 18268)
• Weight : Approx 75g

Input data

• Input signal  : AC Current
• AC Current : <5mΩ
• Input current : 0～1A AC;0～5A AC;0～10A AC
• Max.input current : 1.2×In(continues);2×In(1minute)
• Input frequency range  : 40Hz～400Hz(sine)

Output data

• Output signal : current
• Output current : 0～20mA;4～20mA
• Max.output current : 30mA
• Current output load resistance : (Ui-12)/0.02

Power supply

• Supply voltage(Ue) : 12～30V DC(Ui)
• Power connecting mode : Terminal

Dimensions

• Depth : 65.5mm
• Height : 99.0mm
• Width : 22.5mm

Housing

• Material :  PC
• Degree of protection : IP20
• Flammability rating : UL94/V0
• Colour : gray

EMC data

• Electrical fast transient/burst immunity :  According to:IEC 61326-1
• Surge immunity :  According to:IEC 61326-1
• Radiated,radio-frequency,electromagnetic field immunity :  According to:IEC 61326-1
• Electrostatic discharge immunity :  According to:IEC 61326-1
• Immunity to conducted disturbances, induced by radio-frequency fields :   According to:IEC 61326-1
• Immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz :  According to:IEC 61326-1

Connection data

• Conductor cross section solid range :      0.5~2.5mm²
• Conductor cross section flexible range :  0.5~2.5mm²
• Conductor cross section AWG min. :       12
• Conductor cross section AWG max. :       24
• Stripping length :                                      8mm
• Screw thread :                                          M3
• Connection method :                                Screw connection
• Tightening torque min :                            0.5 Nm
• Tightening torque max. :                          0.6 Nm

Installation

• Mounting type :  DIN35mm